Output – Laser Phototypesetting        The operator of the laser Imagesetter can open the file in the local software to help check the loss or obvious error of the file and correct the error. Therefore, this inspection method is very careful and stable, but it will waste a lot of time.Output – Laser Phototypesetting        Moreover, there are some defects in this method, which can not be found in the inspection; Output – Laser Phototypesetting      This method is not available for postscript files. Although many production centers do this, it is also difficult to ensure that all required fonts exist in the workstation or rip, especially for the placed EPS files.Output – Laser Phototypesetting        The application file can tell us what font is used in the document, but it won’t tell us what font is used in the EPS file.Output – Laser Phototypesetting       Now there is software for pre inspection before output, which can help operator […]

Development Of Styrene Acrylic Waterborne Varnish For Printing Paper        Styrene, methyl methacrylate, butyl acrylate and other monomers were used as the monomers to absorb the characteristics of microemulsion polymerization and soap free emulsion polymerization.Development Of Styrene Acrylic Waterborne Varnish For Printing Paper        Styrene acrylic copolymer emulsion was synthesized by feeding in a non pre emulsified semi continuous feeding mode. Development Of Styrene Acrylic Waterborne Varnish For Printing Paper       The effects of pH regulator, subsequent monomer dropping time and heat preservation reaction time on the properties of emulsion and latex film were studied. The results showed that the monomer conversion, the solid content and the gel rate of the emulsion were 95.31%, 42.66% and 0.41% respectively.Development Of Styrene Acrylic Waterborne Varnish For Printing Paper        The gloss of […]

Analysis On The Aauses Of Printing Dirty        Quality is the lifeblood of an enterprise’s survival and development. In the process of actual operation, if you don’t pay attention to it, it will lead to dirty prints and directly affect the quality of prints. Below, I will summarize from long-term practice that these faults can be eliminated in time and accurately.Analysis On The Aauses Of Printing Dirty 1. Water spots. According to the principle of oil-water incompatibility, if there are water droplets on the paper, a water spot will be left on the print. Cause analysis:Analysis On The Aauses Of Printing Dirty (1) If the air pump is in the environment of high temperature and humidity, and the offset press is placed in the air-conditioning workshop, the moisture in the humid air will be blown to the cool environment through the air pump, and the salty water droplets will be condensed and blown to the paper through the presser foot and paper separation nozzle.Analysis On The […]

Advantages Of Flexographic Printing For Coated White Kraft Linerboard         With the continuous improvement of flexographic printing supporting technology, the configuration of corrugated board ink printing machine has been gradually improved. Many domestic paper processing plants have successively introduced ink printing machines with high screen anilox rollers.Advantages Of Flexographic Printing For Coated White Kraft Linerboard       This will help to further promote the wider application of coated white kraft linerboard in corrugated box packaging.Advantages Of Flexographic Printing For Coated White Kraft Linerboard          In the early paper packaging industry, coated paper was usually only used in offset printing or preprint. Because the characteristics of coated paper itself are most suitable for offset printing.Advantages Of Flexographic Printing For Coated White Kraft Linerboard        The traditional corrugated paper printing and packagin […]