The winding film is similar to the shrink film. The film surrounds the whole, and then two hot handles seal the films at both ends together. This is the older use of film winding, which has developed more.
2. Full width
The winding film should be wide enough to cover the film. Some are regular in shape and some are used. The film thickness is 17 ~ 35 M.
The winding film is a relatively simple one in the whole film. The film can be clamped on a frame, held in the hand, on the top, or rotated. It is mainly used for reconditioning after damage. This speed is slow, and the suitable film thickness is 15 ~ 20 m.
4. Stretching film winding machine
This is a common and widely used machine for winding film. The film is fixed on the base and can move up and down. This capacity is very large, about 15 ~ 18 discs per hour. The suitable film thickness is about 15 ~ 25 M.
5. Horizontal machine
Different from others, the film revolves around things and is suitable for carpets, plates, fiberboards, special-shaped materials and other long goods.
6. Paper cylinder
This is one of the newer uses of winding the whole film, which is better than the reducing film used in the old carton. The suitable film thickness is 30 ~ 120 M.
The winding film can not only reduce the material consumption but also reduce the storage space. In foreign countries, it was introduced in 1984 for the first time. In a short year, many of them appeared in the market, which has great potential. Suitable film thickness: 15 ~ 30 m;
8. Pipes and cables
This is an example of a special field where equipment is wound at the end of a production line. The fully automatic stretching film can not only replace the tape binding material, but also play a protective role. The applicable thickness is 15 ~ 30 m.
9. Stretching form of mechanism
The winding film shall be stretched. The mechanical stretching includes direct stretching and pre stretching. There are two types of pretension. One is the drum pretension and the other is the electric tension.
The direct stretching of the winding film is to complete the stretching between and the film. This method has a low elongation rate (about 15% - 20%). When the elongation rate exceeds 55% - 60%, the film width will be reduced beyond the original yield point of the film, the puncture performance will be lost, and the film will be easily broken. In addition, with 60% elasticity and large traction, the goods are likely to be deformed for light goods.
Pre tensioning is done by two rollers. The two drums stretched in advance by the drum are connected together in gear. The stretching rate may vary with the gear ratio, and the tension is generated by the rotary table. Stretching occurs in a short distance, and the friction between the drum and the film is large, so the film width will not be reduced, and the original puncture performance of the film will remain unchanged. No stretching occurs during actual winding, which reduces the damage caused by sharp edges or angles, and the stretching ratio can be increased to 110%. The tension mechanism of the electric pretension is the same as that of the roller. However, it is different that the two rollers are driven by electricity. Stretching has nothing to do with. Therefore, it is applicable to light, heavy and irregular goods with strong adaptability. Due to the low hourly tension, the pre stretching rate of this method reaches 300%, which greatly saves materials and costs. Suitable film thickness is 15 ~ 24 M.