The operator of the laser Imagesetter can open the file in the local software to help check the loss or obvious error of the file and correct the error. Therefore, this inspection method is very careful and stable, but it will waste a lot of time.Output – Laser Phototypesetting
Moreover, there are some defects in this method, which can not be found in the inspection; Output – Laser Phototypesetting
This method is not available for postscript files. Although many production centers do this, it is also difficult to ensure that all required fonts exist in the workstation or rip, especially for the placed EPS files.Output – Laser Phototypesetting
The application file can tell us what font is used in the document, but it won’t tell us what font is used in the EPS file.Output – Laser Phototypesetting
Now there is software for pre inspection before output, which can help operators overcome these problems. These program checking software check PS files and allow us to view rasterized pages on the screen.Output – Laser Phototypesetting
Output the file to the laser Imagesetter Output – Laser Phototypesetting
In order to reduce costs, many output centers use common software and consumables. So the question is whether the materials used are reliable. If the result is reliable, it may be used.Output – Laser Phototypesetting
For films without brand, the quality of each purchase may be different. Therefore, a living piece looks good this month, but it may not be next month. Output – Laser Phototypesetting
If we use ordinary films and materials, we should always check the output results to calibrate our laser Imagesetter more often to ensure the stability of the quality of the final output.Output – Laser Phototypesetting
In addition, the laser Imagesetter and developing equipment shall be cleaned frequently, and the liquid medicine for development shall be updated.Output – Laser Phototypesetting
In addition, keep close contact with the manufacturer or seller of laser Phototypesetter to maintain the correct working environment of the equipment.Output – Laser Phototypesetting
Moreover, it is necessary to ensure that the laser Phototypesetter and developing equipment are handled in an absolutely normal and good working state. Output – Laser Phototypesetting
There are some problems with these equipment, which may cause waste and reduce efficiency. Moreover, from the perspective of optimizing the operation of Phototypesetter, periodic calibration of equipment is a very key problem.Output – Laser Phototypesetting
A good calibration status should ensure that our equipment produces the correct film density. Some output centers calibrate the equipment at the beginning of each cycle, which can be a day, a week or a month, and any time of material replacement.Output – Laser Phototypesetting
We should calibrate the equipment with calibration test strips provided by the manufacturer or produced by third parties such as X-Rite and RIT. The test strip used should match our work.Output – Laser Phototypesetting
Every time we add chemicals to the developing equipment or change chemicals and materials, we have to carry out testing. When changing from software to paper, it should also be tested.Output – Laser Phototypesetting
If we use ordinary film, we should test each time we use a new roll of film until we can ensure that the quality of the film used each time is the same.Output – Laser Phototypesetting
Several ways to improve the efficiency of Phototypesetter Output – Laser Phototypesetting
1. Sometimes, changing the direction of the Phototypesetting page can greatly improve the imaging speed. For example, for a page such as stationery, turning the long side to the axial direction during exposure imaging saves both exposure time and materials.Output – Laser Phototypesetting
2. If there is a group of live parts for output, remove the problematic live parts, image the smooth live parts first, then correct the problematic live parts, and then carry out the exposure imaging process.Output – Laser Phototypesetting
3. Ensure that there are enough films in the film box as far as possible, and take away the existing films in the film receiving box as far as possible. To reduce the loading and unloading time.Output – Laser Phototypesetting
4. For each document requiring film production, ask for a hard copy sample to compare whether the output effect is wrong.Output – Laser Phototypesetting
5. If some customers’ live parts often have problems when they are exported, and there is no money to make from these customers, they can be “dismissed”, but there is a problem in doing so, that is, such customers may run to their competitors.Output – Laser Phototypesetting
A large number of packaging waste and disposable consumer goods waste have caused increasingly serious pollution to the environment. Environmental protection organizations and governments attach great importance to this. Output – Laser Phototypesetting
Whether resources are scarce or not, many countries and regions have strict legal restrictions on excessive packaging. Output – Laser Phototypesetting
This is an illegal act in South Korea. If manufacturers do not reduce the packaging ratio and layers of products in accordance with government regulations, they can be fined up to 3 million South Korea (about 18000). Output – Laser Phototypesetting
The Korean government has three measures to regulate manufacturers. First, directly inspect the packaging; Second, reward; Third, fine service. Output – Laser Phototypesetting
For goods suspected of excessive packaging, manufacturers are required to send the goods to special authorities for inspection. After receiving the notice, Output – Laser Phototypesetting
the manufacturer must go to the inspection authority for inspection at its own expense within 20 days, and submit the inspection results to the competent authority for inspection. Output – Laser Phototypesetting