In the process of packaging printing, it is often necessary to check the printing plate before printing.Solve The Problem Before Outputting The Printing Plate
General inspection methods.Solve The Problem Before Outputting The Printing Plate
This method is widely used in output centers and design companies. Solve The Problem Before Outputting The Printing Plate
Its main equipment is plate viewing table and densitometer. Densitometer is the key equipment for testing printing plate. Solve The Problem Before Outputting The Printing Plate
Its basic function is to read the tone percentage of mesh tone, so as to judge whether the size of mesh tone dot generated by plate making machine is correct.Solve The Problem Before Outputting The Printing Plate
For example, if the 40% gradient in the original drawing corresponds to the measured density on the printing plate, is it 40%. The following are the main inspection aspects of general inspection and their meanings:Solve The Problem Before Outputting The Printing Plate
a) Test the dot ladder attached to the printing plate to judge whether each step of the printing plate is correct. Solve The Problem Before Outputting The Printing Plate
It mainly checks whether the plate making process and its parameters (such as development speed,Solve The Problem Before Outputting The Printing Plate
temperature, time and developer concentration) are correct, and may also include the problems of the plate making machine itself, such as the quality of linearization.Solve The Problem Before Outputting The Printing Plate
b) Observe the quality of the printing plate: including whether the exposure is uniform and whether the printing plate is scratched.Solve The Problem Before Outputting The Printing Plate
c) Check postscript error: it is used to check whether the postscript interpreter misses the content in the interpretation of the file. It is mainly used to observe whether the content on each printing plate is not output.Solve The Problem Before Outputting The Printing Plate
For color separations, in addition to single observation, four color separations should be observed together to see whether the tone and concentration of the image are normal and whether the registration is correct.Solve The Problem Before Outputting The Printing Plate
2. Check the proofing system.Solve The Problem Before Outputting The Printing Plate
Now CTP output center usually uses color digital proofing before printing plate. If any problem is found, modify the electronic document. The color sample after successful proofing will become the standard sample for color printing.Solve The Problem Before Outputting The Printing Plate
This is different from the traditional film, which is regenerated into printing plate and proofed by proofing machine. It is also a problem to be solved and improved by CTP.Solve The Problem Before Outputting The Printing Plate