1、 Cleaning ink bucket experience

       Stick a transparent tape with the width of the ink bucket inside the ink bucket along the length of the ink bucket. When cleaning the ink bucket, just scrape the ink on the tape, pull out the tape and throw it away. When printing short version live parts with offset press, especially small offset press, this method can quickly and conveniently clean the ink bucket.Ink Bucket Cleaning And Field Printing

2、 Printing field method

      Our factory has undertaken the printing business of a number of spot color field prints, using 80g / m2 coated paper. As a rule, we should sun a field PS plate for printing, but we printed field prints with good quality and full field without flower with waste PS plate, which was highly praised by customers. Ink Bucket Cleaning And Field Printing

       The specific method is: select a waste PS plate with flat layout, no concave convex and damage. When printing, the reverse side of the plate faces outward, the front side faces inward, no water and only ink.Ink Bucket Cleaning And Field Printing

      When printing coated paper, in order to prevent the back from sticking dirty, it is best to use fast drying ink. Adding 8% gram adhesive is very effective in preventing dirt. After adding gram adhesive to the ink, it can not only prevent dirt, but also not affect the color saturation, Ink Bucket Cleaning And Field Printing

     And the ink layer appears brighter and clearer, but also more convenient for post press processing, such as calendering, film coating, bronzing, etc. Here, gram adhesive can replace anti sticking and dirty materials such as dry oil.Ink Bucket Cleaning And Field Printing